GEPRC 7.5" Crocodile75 V3 HD Wasp Long Range FPV BNF
by GEPRC
Sold out
Original price
$0.00
-
Original price
$0.00
Original price
$0.00
$710.00
$710.00
-
$748.00
Current price
$710.00
free return
Do you live in Belgium or The Netherlands? Then you can return your package for free!
Out of stock
Out of stock
Out of stock
Out of stock
Description
Overview
The appearance of the Crocodile75 V3 adopts a new design, the overall structure is strengthened to effectively reduce the vibration of the fuselage and make the flying experience smoother and more stable. The Crocodile75 V3 is equipped with an O3 Air Unit with additional special cooling components for a effective cooling environment.The battery plug is integrated into the fuselage for convenient use. The power is upgraded with TAKER 32-bit_128K 60A ESC and 2806.5 1350KV motor, enough power. Regarding energy consumption during flight: save energy and efficiency.Characteristics
- Adopt a new appearance design, strengthen the fuselage structure and reduce the impact of fuselage vibration on the gyroscope sampling data.
- Equipped with SPEEDX2 2806.5 1350KV motor and HQ7.5×3.7×3 with sufficient power and high efficiency.
- Upgrade the ESC to TAKER 32-bit_128K 60A.
- Add protective side panels to effectively protect the electronic control system from instability caused by sand and dust pollution
- The integrated design of the battery plug and the housing simplifies the power-on operation, simplicity and beauty.
- Equipped with O3 Air Unit and added special heat sink, excellent heat dissipation, to prevent O3 Air Unit from overheating and stop recording.
- The Crocodile75 V3 has a longer fuselage and can be fitted with a Lipo 6S 3300mAh-4500mAh or Lion 6S 6000mAh battery for flight.
- Perfect match for 7-inch or 7.5-inch propellers
Model | Crocodile75 V3 HD Wasp |
Frame | GEP-LC75V3 |
Wheelbase | 342mm |
Top plate | 2.5mm |
Bottom plate | 3.0mm |
Arm plate | 6.0mm |
Splint plate | 2.5mm |
FC | SPAN F722-BT-HD V2 |
ESC | TAKER 32Bit_128K 60A |
MCU | STM32F722RET6 |
Gyro | ICM 42688-P |
OSD | Betaflight OSD w/AT7456E chip |
VTX | Link |
Camera | Runcam Wasp |
Antenna | 5.8G LHCP SMA mode |
Motor | SPEEDX2 2806.5 1350KV |
Propeller | HQProp 7.5×3.7×3 |
Weight | 615g |
Receiver | PNP (built-in Link receiver) / TBS NanoRX / GEPRC ELRS 2.4G / GEPRC ELRS 915 |
Recommended battery | LiPo 6S 2600mAh-4200mAh / Lion 6S 6000mAh |
Flight time | 12-30 minutes |
What's included
- 1 x Crocodile75 V3 HD Wesp
- 4 x HQProp7,5×3,7×3
- 2 x M20 * 250 mm batterijriem
- 2 x Silicone Battery Pads
- 1 x set of screws
- 1 x L-shaped screwdriver (1.5mm)
- 1 x L-shaped screwdriver (2mm)
- 1 x L-shaped screwdriver (3mm)
- 1 x M5 key
- 1 x Keychain
- 1 x GP-camerabasis