iFlight BLITZ F7 Pro Flight Controller w/ 35x35mm Mount Hole
by iFlight
Original price
$0.00
-
Original price
$0.00
Original price
$0.00
$156.00
$156.00
-
$156.00
Current price
$156.00
free return
Do you live in Belgium or The Netherlands? Then you can return your package for free!
In stock at supplier
Description
Characteristics
- Improved circuit design, better components and less electrical noise!
- DJI HD VTX connector (Plug-and-Play / no soldering required)
- FC indicator LEDs for visual troubleshooting
- Black Box van 512 MB
- Met LC-filter
| Mounting pattern | 35*35mm/ 4mm PCB gat diameter |
| Smartaudio / IRC Tramp VTX protocol | Supported |
| Firmware target | IFLIGHT_BLITZ_F7_PRO |
| Input voltage | 14.8V-34V (4S-8S LIPO) |
| Engine outputs | 4x (SH1.25 connector) |
| flash memory | 512MB (Blackbox flash) |
| I2C serial | SDA / SLA pads |
| Dimensions | 41*41.5mm |
| Barometer | DPS310 |
| OSD Chip | AT7456E |
| LED controller | And |
| MCU | STM32 F722 |
| Weight | 17g (±2) |
| Beeper pad | And |
| Gyro | BMI270 |
| UARTS | 6 |
Wiring suggestion
- UART1 for VTX HD/Analog
- UART2 for receiver
- UART4 for GPS
- UART5 for ESC telemetry
- 8×Dshot/PWM outputs
- 1×I2C for GPS Mag
Tips
- 1. F722 MCU has an internal inverter.
- 2. SBUS、CRSF、ELRS、IBUS、DSM ETC... can be connected to any unused UART_RX, we suggest you connect to Uart_RX2
- 3. Frsky SmartPort, Tramp & Smartaudio can be connected to any unused UART_TX, we suggest you connect to Uart_TX1
- 4. F.port can be connected to any unused UART_TX, we suggest you connect to Uart_TX2
Supplied connectors (Plug-and-Play harness)
- 1xGH1.25 7-pin connector for HD VTX/Analog VTX (RX2/GND/RX1/TX1/GND/+12V/Video out)
- 1xGH1.25 8pin connector for ESC1 (GND/VBAT/M1/M2/M3/M4/CUR/RX5)
- 1xGH1.25 8pin connector for ESC2 (GND/VBAT/M5/M6/M7/M8/CUR/RX5)
- 1xGH1.25 4pin connector voor GPS&Mag(+5V/GND/TX4/RX4/SDA/SCL)
- 1xGH1.25 3pin connector for analog camera (Video in/GND/+5V)
- 1xGH1.25 4-pin connector for each receiver (GND/+5V/RX2/TX2)
- 1xGH1.25 4pin connector voor LED&Beeper(LED/BZ-/+5V/GND)
What's in the package
- 1 Piece BLITZ F7 Pro Flight Controller
- 1 set of FC connectors (as above)
- 1 set of silicone grommets