iFlight iPower GM6208-150T Gimbal Motor w/ AS5048A Encoder
by iFlight
Original price
$0.00
-
Original price
$0.00
Original price
$0.00
$153.00
$153.00
-
$153.00
Current price
$153.00
free return
Do you live in Belgium or The Netherlands? Then you can return your package for free!
In stock at supplier
Description
Description
- iPower Motors' GM62 series motor is the ultimate brushless gimbal motor for DSLR/CANON 5D MARKII, MARKIII cameras. This motor is designed for large-scale multi-rotor platforms that want to lift Red Epic and DSLR sized gears - 4KG/cm of torque. The principle of camera stabilization using direct drive brushless motors. In fact, the gimbal based on BLDC motors is very similar to the common gimbal based on hobby servo.
| Model | GM6208 |
| Motor outside diameter | F69.5±0.05mm |
| Engine height | 32±0,2mm |
| Hollow shaft (OD) | Ф25-0,01/-0,015mm |
| Hollow axis (ID) | F22+0.05/+0mm |
| Wire length | 610±3mm |
| AWG cable | #24 |
| engine weight | 265±0,5g |
| Wire connection | 2,5mm dupont-connector |
| No load current | 20V |
| No load voltage | 0,08±0,1A |
| No load RPM | 209~231RPM |
| Load current | 20V |
| Load voltage | 1,2A |
| Load torque (g) | 2600-3600 |
| Motor internal resistance | 32Ω±5% (Resistance varies with temperature) |
| High voltage test | DC500V 1mA @2sec |
| Rotorhuis run-out | ≤0,1mm |
| Steering (shaft extension) | clockwise |
| High-low temperature test | High: Hold 60℃ for 100 hours, and the motor can work normally after 24 hours at room temperature. Low: Keep at -20℃ for 100 hours, and the motor can work normally after 24 hours at room temperature. |
| Maximum power | ≤25W |
| Working current | 3-5S |
| Working temperature | -20~60℃;10~90%RH |