Skip to content
FAQ Contact Order Tracking Affiliate
|<none>|1005002926406961

iFlight iPower GM8112-80T Gimbal Motor w/ Alexmos 32BIT BGC set

by iFlight
Sold out
$0.00 - $0.00
$0.00
$866.00
$866.00 - $866.00
$866.00

free return

Do you live in Belgium or The Netherlands? Then you can return your package for free!

Out of stock
Description
Description
  • The controller can be used to build high performance 3-axis camera stabilization systems that can be mounted on UAV and to build portable camera stabilizers. This version of the controller is our new direction in the development of the stabilizing solutions. It replaces the previous 8-bit version of the SimpleBGC controller, keeping 100% backward compatibility, but adding the new functionality.
  • The GM8112 motor from iPower Motors is the ultimate brushless gimbal motor for Red Epic / Large Cameras. This motor is designed for large-scale multi-rotor platforms that want to lift Red Epic and DSLR sized gears - 6 kg/cm of torque. The principle of camera stabilization using direct drive brushless motors. In fact, the gimbal based on BLDC motors is very similar to the common gimbal based on hobby servo.
  • Board size: 50×50 mm
  • The distance between the mounting holes: 45mm
  • The diameter of the mounting holes: 3mm
  • Supply voltage: 3S to 6S
  • Maximum motor current: 1.5 A
  • 5V output current to power external devices: up to 1 A
Model GM8112
Motor Out Diameter Ф89.5±0.05mm
Motor Height 26±0.2mm (Including Encoder Housing)
Hollow Shaft(OD) Ф25-0.008/-0.012 mm
Hollow Shaft(ID) Ф22+0.05/+0.1 mm
Wire Length 610±3mm
Cable AWG #24
Motor Weight 428±1g
Wire plug 2.5mm dupont connector
No-load current 22V
No-load volts 0.3±0.1 A
No-load Rpm 380~420 RPM
Load current 20V
Load volts 2a
Load torque(g) 6000-9000
Motor internal resistance 4.2Ω±5% (resistance varies with temperature)
High voltage test DC500V 1mA @2sec
Rotor housing runout ≤0.1mm
Steering (axle extension) clockwise
High-low temperature test
High temperature Keep it at 60°C for 100 hours and the motor can work normally after 24 hours at room temperature
Low temperature Keep it at -20°C for 100 hours and the motor can work normally after 24 hours at room temperature
Maximum power ≤80W
Working current 3-5S
Working temperature -20~60℃;10~90%RH

 

What is included

  • 3 x GM8112 cardanische motor
  • 1 x Alexmos 32BIT BGC kit without alum case
  • 1x Set of connection cables