iFlight iPower GM8112-80T Gimbal Motor w/ AS5048A Encoder
by iFlight
Original price
$0.00
-
Original price
$0.00
Original price
$0.00
$254.00
$254.00
-
$281.00
Current price
$254.00
free return
Do you live in Belgium or The Netherlands? Then you can return your package for free!
In stock at supplier
In stock at supplier
In stock at supplier
Description
Description
- The GM8112 motor from iPower Motors is the ultimate brushless gimbal motor for Red Epic / Large Cameras. This motor is designed for large-scale multi-rotor platforms that want to lift Red Epic and DSLR sized gears - 6 kg/cm of torque. The principle of camera stabilization using direct drive brushless motors. In fact, the gimbal based on BLDC motors is very similar to the common gimbal based on hobby servo.
| Model | GM8112 |
| Motor Out Diameter | Ф89.5±0.05mm |
| Motor Height | 33.4±0.2mm (Including Encoder Housing) |
| Hollow Shaft(OD) | Ф25-0.008/-0.012 mm |
| Hollow Shaft(ID) | Ф22+0.05/+0.1 mm |
| Wire Length | 610±3mm |
| AWG cable | #24 |
| engine weight | 446±1g |
| Wire Connector | 2.5mm dupont connector |
| No Load Current | 22V |
| No Load Voltage | 0.3±0.1 A |
| No Load Rpm | 380~420 RPM |
| Load Current | 20V |
| Load Voltage | 2a |
| Load Torque(g) | 6000-9000 |
| Motor Internal Resistance | 4.2Ω±5% (Resistance varies with temperature) |
| High Voltage Test | DC500V 1mA @2sec |
| Rotor housing Eccentricity | ≤0.1mm |
| Steering (shaft extension) | clockwise |
| High-low temperature test | |
| High temperature | Store at 60℃ for 100 hours, and the motor can work normally after 24 hours at room temperature |
| Low temperature | Store at -20℃ for 100 hours, and the motor can work normally after 24 hours at room temperature |
| Maximum Power | ≤80W |
| Work flow | 3-5S |
| Working temperature | -20~60℃;10~90%RH |