iPower GM110-8 Gimbal Motor w/ AS5048A Encoder / Encode Alum Case
by iFlight
Original price
$0.00
-
Original price
$0.00
Original price
$0.00
$278.00
$278.00
-
$317.00
Current price
$278.00
free return
Do you live in Belgium or The Netherlands? Then you can return your package for free!
In stock at supplier
In stock at supplier
In stock at supplier
Description
Description
Characteristics
- The principle of camera stabilization using direct drive brushless motors. In fact, the gimbal based on BLDC motors is very similar to the common gimbal based on hobby servo.
Characteristics
- Sealed housing to prevent contamination from dust and dirt.
- Hollow shaft for slip ring
- Configuration: 24N28P, provide more torque.
| Model | GM110-8 |
| Engine outer diameter | Ф110±0.05mm |
| Engine height | 33.9±0.2mm (Including encoder housing) |
| Inner diameter hollow shaft | N/A |
| Outer diameter hollow shaft | N/A |
| Cable length | 610±3mm |
| Kabellabel AWG | #24 |
| engine weight | 610±3g |
| Wire connector | 2.5mm dupont connector |
| No load current | 0.09±0.1 A |
| No load voltage | 20V |
| No load speed | 125~139 RPM |
| Load current | 2a |
| Load voltage | 20V |
| Tax torque | 8000-12000 g |
| Internal motor resistance | 20.19Ω±5%（Resistance varies with temperature） |
| High voltage test | DC500V 1mA @2sec |
| Rotor housing spout | ≤0.1mm |
| Direction of rotation (shaft extension) | Clockwise |
| High temperature | Keep at 60℃ for 100 hours and the motor can work normally after 24 hours at room temperature |
| Low temperature | Store at -20℃ for 100 hours, and the motor can work normally after 24 hours at room temperature |
| Maximum power | ≤60W |
| Work flow | 4-6S |
| Working temperature | -20~60℃;10~90%RH |