X-601 Coaxial Drone Arm Set (MN601-S KV170, Alpha 60A HV ESC, P20x6 Prop)
by T-Motor
Original price
$0.00
-
Original price
$0.00
Original price
$0.00
$727.00
$727.00
-
$884.00
Current price
$727.00
free return
Do you live in Belgium or The Netherlands? Then you can return your package for free!
in stock, ready to be shipped
in stock, ready to be shipped
Description
Engine Dimension | ⌀68.8*34.9mm | Stator | Imported silicone steel plate, anti-rust treatment, 150°C heat-resistant coatings |
Configuration | 24N28P | Shaft Diameter | IN: 6mm, OUT: 6mm |
Lower | Imported 626ZZ | Magnet level | 150°C heat resistance |
Conduit cable | 16AWG*150mm | Copper wire | 180°C heat resistance: Level H |
Coil Insulation Test | 500V | Centrifugal Cooling Design | Yes |
Rotor Dynamic Balance Standard | ≤5Mg | Engine Dynamic Balance Standard | ≤10Mg |
IP | IP45 |
KV | 170 | Nominal Voltage (Lipo) | 6-12S |
Stationary Power (20V) | 0.8A | Peak current (180s) | 30A |
Maximum Power (180s) | 1500W | Motor weight (incl. cable) | 250g |
Internal Resistance | 115ΜΩ |
Fashion model | ALPHA 60A 12S V1.2 |
Supported Voltage (6S) | 18-50.4V |
Continuous Current | 60A |
Peak current (10s) | 80A |
Standby Consumption | ≤50mA |
BEC | NO |
Throttle Position Range | 1100-1940μs |
Throttle Refresh Rate | 500Hz |
Accelerator response speed | 300ms |
Mate | 78.7 x 32.5 x 16.2mm |
Weight (incl. cables) | 73g |
Fashion model | 20x6 inches (508mmx152.8mm) |
Weight (Single Blade) | 47g |
Thrust Limitation | 10kg |
Optimal RPM | 3000-5500 RPM/min |
Surface treatment | Polished |
T-MOTOR Series | Integrated with 2 blades |
Material | CF+Epoxy |