Amewi G151H Hydraulic Track Loader 1/14 PNP (Metal)
free return
Do you live in Belgium or The Netherlands? Then you can return your package for free!
Description
PNP
The G151H Hydraulic Track Loader comes with all the electronics needed to operate the Track Loader. All you need to do is install the batteries. Batteries for the remote control are not included and must be provided by you.
Overview
Hydraulic crawler loader G151H in 1:14 scale, which offers completely new possibilities on the construction site or in any other application area. Due to the enormous adjustment options of the boom with the massive bucket, this model combines the advantages of a conventional wheel loader with the powerful crawler drive of a bulldozer. In addition, this high-quality model is equipped at the rear with a ground rake, which can easily break up even harder soils. The entire model is made of metal, resulting in a weight of nearly 15 kg. In combination with the torque-strong 540 brushed motors on the crawler drive, perfect off-road propulsion is guaranteed. The welded steel bucket can also lift a weight of approximately 13 kg at the top. The model itself is made of a zinc and aluminum alloy (except for the chain and bucket, which are made of steel). Furthermore, heavy hydraulic lines are installed, and the pump is equipped with a brushless motor. The max. pump pressure is approximately 5Mpa, which corresponds to about 50Bar! The average working pressure is about 3Mpa (30Bar), and the max. lifting height is 403mm with a max. load of 13kg.
Characteristics
- Welded steel bucket and fixed ground rake for loosening solid ground.
- Complete LED lighting and sound switchable from the transmitter (on/off)
- All doors and hatches can be opened including the removed driver's cabin.
- Alloyed zinc and cast aluminum (except chain and hydraulic pump).
- Reliable brushless hydraulic system with adjustable pump
- Max. Pressure: approx. 50 bar
- Working pressure: approx. 30 bar
- Max. lifting capacity: approx. 13 kg
- 10-channel transmission system already installed
- Hydraulic oil included with delivery
| Dish | 1:14 |
| Total length | 627 mm |
| Width | 220 mm |
| Height | 278 mm |
| Weight | ca. 15 kg |
| Body | Zinc and aluminum alloy |
| Behind | Welded steel |
| Chassis | Steel |
| Max. height with extended bucket | 403 mm |
| Caterpillar length | 309 mm |
| Wide base track chain | 218 mm |
| Length ripper | ca. 130 mm |
| Pompopbrengst | approx. 800 ml/min |
| Nominal pump pressure | 3 MPa / 30 Bar |
| Max. pompdruk | 5 MPa / 50 Bar |
| Max. lifting force | ca. 13 kg |
| Battery compartment dimensions | 140x35x43 mm |
| Connection | XT60 |
| Runtime with e.g. 5200mAh | about 35 minutes |
| Built-in LED lighting system | Yes |
| Built-in sound module | Yes |
| Transmitter | 2.4 GHz, 12 channels, ready installed |
| Recipient | 10 channels, ready installed |
What is included
- Model
- Transmitter
- Hydraulic oil
- Vulfles
- Reserve chain links
- USB cable
- Instructions for use DE/EN
What else is needed
- 4x AA Mignon 1.5V batteries for the transmitter
- LiPo battery 3S 11.1V LiPo battery, max. dimensions: 140x35x43mm, XT60 connector
- Barns