Amewi AMXFlight YAK-11 1450mm Airplane BNF (red/white, Foam)
free return
Do you live in Belgium or The Netherlands? Then you can return your package for free!
Description
BNF
The AMXFlight YAK-11 contains most of the electronic components and only requires a battery, transmitter, and receiver to operate the aircraft.
Overview
The Yak-11, designed in the 1940s for advanced training of fighter pilots, incorporated features from the wartime-proven Yak-1, -3, -7, and -9, and enhanced its performance with a 700 hp air-cooled radial engine. This versatile two-seater was widely used in Warsaw Pact countries, the Middle East, Austria, and China, with a wingspan of 9.40 meters. The AMXFlight Yak-11 is an exceptional scale replica with red and white paint, authentic decals, and an impressive wingspan of 1450 mm. The large fuselage, combined with a 16 x 6E propeller, contributes to its striking appearance. Delivered as a PNP model, it includes pre-installed servos, motor, controller, retractable landing gear, and spreader landing flaps, requiring minimal assembly. The spacious fuselage accommodates a 6S LiPo battery (5000 mAh), allowing for easy adjustments of the center of gravity. The sturdy landing gear with active damping can handle uneven surfaces with ease, while spreader flaps reduce landing speed. This model is designed for both advanced and experienced pilots, offering dynamic aerobatics, fast low passes, and flight times of up to 10 minutes on a 6S LiPo 22.2V 5000mAh. The impressive proportions and performance make it a standout presence on the field.
Characteristics
- Great look (scale replica)
- Scale cockpit with pilot figure
- Very beautiful red/white paint
- Quick release for the hood
- Wooden inserts for securely holding the battery and receiver
- Very good flying characteristics at every speed (slow to fast)
- Very high quality of the material (EPO)
- Powerful brushless motor (Potenza BL65 3D / 550KV)
- Large 80A controller for 6S LiPo batteries
- Large 16 x 6"E - propeller
- High-quality digital servos with metal gears
- Fully steerable tail wheel for complete ground control
| Wingspan | 1450 mm |
| Length | 1300 mm |
| Weight | Approximately 2500 g (without battery) |
| Main material | FUEL |
| Thrust | More than 1:1 |
| Engine | Potenza BL65 3D / 550KV |
| Regulator | 80A ESC Brushless 6S with XT90 connector and BEC system for power supply |
| Servos | 6x Digitaal 19g MG |
| Propeller | 16 x 6E High Performance Prop |
| Landing gear | Electric retractable, fully metal construction, with springs and delay when folding in and out. |
What is included
- PNP model with all electronic components fully installed
- Small parts such as screws, scale antennas (optical tuning), tail skid, and much more.
- User manual (illustrated) DE/EN
What else is needed
- Sender/receiver min. 6-channel
- LiPo Battery 6S min. 4500-5000mAh 22.2V min. 30-40C XT90
- Charger for LiPo batteries
- Tools