iFlight iPower GM2804 Gimbal Motor w/ AS5048A Encoder
by iFlight
Original price
$0.00
-
Original price
$0.00
Original price
$0.00
$68.00
$68.00
-
$68.00
Current price
$68.00
free return
Do you live in Belgium or The Netherlands? Then you can return your package for free!
In stock at supplier
Description
Description
- The GM2804H-100T motor from iPower Motors is the ultimate brushless gimbal motor for GoPro cameras. This motor is designed for small multi-rotor platforms that want to lift GoPro gears - 0.5-1 kg/cm of torque. The principle of camera stabilization using direct drive brushless motors. In fact, the gimbal based on BLDC motors is very similar to the common gimbal based on hobby servo.
| Model | GM2804 |
| Engine Outer Diameter | Ф35±0.05mm |
| Engine Height | 25±0.2mm (including encoder housing) |
| Hollow shaft (OD) | F8-0.008/-0.012 mm |
| Hollow axis (ID) | F6.5+0.05/0 mm |
| Wire length | 60±3mm |
| AWG cable | #24 |
| engine weight | 51±0.2g |
| Wire connector | PH3P |
| No load current | 10V |
| No load voltage | 0.09±0.05 A |
| No load speed | 1602~1771 RPM |
| Load current | 10V |
| Load voltage | 0.8A |
| Tax torque | 250-350 g |
| Internal resistance motor | 9Ω±5% (resistance varies with temperature) |
| High voltage test | DC500V 1mA @2sec |
| Rotor housing runout | ≤0.1mm |
| Direction of rotation (shaft extension) | Clockwise |
| High-low temperature test | |
| High temperature | Keep at 60℃ for 100 hours and the motor can work normally after 24 hours at room temperature |
| Low temperature | Keep at -20℃ for 100 hours and the motor can work normally after 24 hours at room temperature |
| Maximum power | ≤25W |
| Work flow | 2-3S |
| Working temperature | -20~60℃;10~90%RH |