X-501 Coaxial Arm Set (MN501-S KV300, Alpha 40A LV, P20*6 Prop)
by T-Motor
Original price
$0.00
-
Original price
$0.00
Original price
$0.00
$505.00
$505.00
-
$656.00
Current price
$505.00
free return
Do you live in Belgium or The Netherlands? Then you can return your package for free!
in stock, ready to be shipped
in stock, ready to be shipped
Description
Engine Dimensions | ⌀55.6x 33.9mm |
Stator | Imported silicon steel sheet; Anti-rust treatment; 150°C high temperature resistant coatings |
Configuration | 24N28P |
Shaft diameter | IN: 6mm OUT: 4mm |
Bearings | Imported 696ZZ |
Magnetic properties | Resistant to high temperatures up to 180°C |
Wiring | 16AWG x 150mm |
Copper wire | 220°C high temperature resistance: Level C |
Test insulation of the coil | 500V |
Centrifugal cooling design | Yes |
Rotor Dynamic Balance Standard | ≤5Mg |
Engine dynamic balance as standard | ≤50Mg |
IP rating | IP35 |
KV value | 300 |
Rated voltage (Lipo) | 6-8S |
Quiescent current (15V) | 1.1A |
Peak current (180s) | 40A |
Internal resistance | 63mΩ |
Max. Power (180s) | 1000W |
ESC recommendation | Air 40A |
Propeller recommendation | 20-22" |
Motor weight (Including cable) | 175g |
Supported Voltage (6S) | 18-25.2V |
Continuous Current | 40A |
Peak current (10s) | 60A |
Standby Consumption | ≤50mA |
BEC | NO |
Throttle Position Range | 1100-1940μs |
Throttle Refresh Rate | 500Hz |
Accelerator response speed | 1200ms |
Mate | 64.5 x 29.4 x 14.7mm |
Weight (incl. cables) | 54.5g |
Fashion model | 20x6 inches (508mmx152.8mm) |
Weight (Single Blade) | 47g |
Thrust Limitation | 10kg |
Optimal RPM | 3000-5500 RPM/min |
Surface treatment | Polished |
T-MOTOR Series | Integrated with 2 blades |
Material | CF+Epoxy |