Amewi AMXPlanes Swift 2100 Glider EPO 2100mm Airplane BNF (Foam)
free return
Do you live in Belgium or The Netherlands? Then you can return your package for free!
Description
BNF
The AMXPlanes Swift 2100 contains most of the electronic components and only requires a battery, transmitter, and receiver to operate the aircraft.
Overview
AMXPlanes presents the Swift 2100, its first motor glider, featuring easy assembly, simple hand launching, and excellent flight characteristics. The design of the glider, optimized through CFD processes, achieves an ideal lift-to-drag ratio, ensuring smooth and efficient gliding with precise control. Made from durable EPO foam, the glider is resistant to light impacts, while carbon fiber reinforcements provide structural stability even during dynamic maneuvers.
The factory-installed power system includes an efficient 3136/1000KV brushless motor, combined with a Hobbywing 40A controller and a 3S or 4S LiPo battery. The 10x6 folding propeller provides sufficient thrust for quick climbs, and with good throttle management, flight times of up to 30 minutes are achievable. The 9g digital servos (6x) control motor/throttle, ailerons, flaps, elevator, and rudder. The front-mounted wheel and the plastic parts on the wingtips and tail allow for landing on harder ground.
The Swift 2100 is ideal for both relaxing thermal flying and exciting acrobatic maneuvers, offering a versatile and enjoyable gliding experience.
Characteristics
- Very efficient 10x6" folding propeller incl. aluminum spinner: For the best possible cooling and performance of the propulsion system
- Quick and easy assembly: No glue needed, everything is screwed together.
- Construction according to CFD method: For the optimal lift-to-drag ratio, efficient aerodynamic design for longer flight times of up to 10-30 minutes.
| Wingspan | 2100 mm |
| Length | 1050 mm |
| Height | 290 mm |
| Weight | About 1350 g |
| Main material | Robust EPO material reinforced with carbon fiber and plastic |
| Thrust force | About 1:1 |
| Engine | 3136/1000KV |
| Controller | 40A Hobbywing ESC, XT60 connector |
| Battery | 3-4S possible (2200-3300mAh) |
| Servos | 6x 9g digital |
| Propeller | 10x6 2-blade folding propeller |
| Wing Loading | 38,5 g/dm² |
| Wing surface | 35 dm² |
| Flight time | 10-30 min, depending on the selected battery and the gas percentage |
| Battery compartment | Approximately 210x35x35mm |
| Channels | Minimum 5 channels required |
| Controllable channels | Motor, aileron, flap, elevator, control surface |
| Construction time | About 15 min |
What is included
- Model
- Accessories for assembly
- Instructions for use DE/EN
What else is needed
- Transmitter/receiver: min. 5-channel (6-channel recommended)
- Accu: LiPo 3S/4S 2200-3300mAh (4S 14.8V 2600mAh XT60 recommended)
- Barns
- Tools for mounting the screws on the model