Amewi Eagle Twin V2 40mm EDF Flying Wing BNF (red, Foam)
free return
Do you live in Belgium or The Netherlands? Then you can return your package for free!
Description
BNF
The Eagle Twin V2 contains the most electronic components and only requires a battery, transmitter, and receiver to operate the aircraft.
Overview
The Eagle Twin V2 40mm EDF flying wing is equipped with a newly developed propulsion system featuring 40mm EDFs on both wingtips and a large central battery compartment. Powered by a 4S LiPo battery, the aircraft achieves a power-to-weight ratio of over 1:1.5, allowing for effortless manual takeoff and a top speed of up to 180 km/h. The high maneuverability, built-in gyro, and excellent slow-flight capabilities make it suitable for almost any model airfield or larger fields. The abrasion-resistant plastic parts on the fuselage and wingtips enable easy landings on rough surfaces. With an aerodynamic profile and special EDF configuration, it can perform advanced maneuvers such as flat spins, inverted spins, and loops at high speeds. The model is constructed with high-quality foam, carbon inserts, and reinforcements for optimal performance. Fully assembled and ready to fly, the Amewi Eagle Twin V2 offers a unique hand-launched delta experience.
Characteristics
- Built-in adjustable gyro (optional to use): For maximum performance and directional stability
- High-quality frame made of special foam: In combination with carbon inserts and reinforcements, the model offers excellent flying characteristics.
- Two externally mounted 40mm 12-blade impellers: Furthermore with authentic sound and a thrust-to-weight ratio of 1:1.5 - more thrust than weight = maximum fun factor.
- PNP version: Model almost ready to fly out of the box
- Two Hobbywing ESCs pre-installed
- Two digital metal gear servos pre-installed
- Very visible colors and a wingspan of 1019mm
- Extreme top speed of 180 km/h possible
- Very good flying characteristics at low speed thanks to the selected delta profile.
- Model built in a simulated wind tunnel
- Large battery space for a 4S 1800-2200mAh min. 30C Lipo battery with XT60 connectors.
| Wingspan | 1019 mm |
| Total length | 383 mm |
| takeoff weight | 650 g |
| Engine | 2x brushless 1413 5000KV |
| ESC | 2x 20A Hobbywing |
| Servo | 2x 9g digital MG |
| EDF | 2x 40mm 12-blad |
| Center mass | 162 mm from the front edge of the wing |
| Wing Loading | 35 g/dm² |
| Wing surface | 19,5 dm² |
| Recommended battery | LiPo 4S 2200 - 2600mAh min. 30C |
| Battery dimensions | Approximately 210x40x40mm |
| Flight time | 5-10 min |
| Required level | Advanced, professional |
What is included
- Model ready-made built
- User manual NL
What else is needed
- Sender: recommended min. 5-channel computer sender with delta program (mixer), expo and dual rate programming options
- Battery 4S LiPo 2200 - 2600mAh min. 30C XT60 connector
- Suitable charger for selected LiPo battery