6007-X Drone Arm Set (MN6007II KV160 Motor, Alpha 60A HV ESC, MF2211 Prop)
by T-Motor
Original price
$0.00
-
Original price
$0.00
Original price
$0.00
$393.00
$393.00
-
$393.00
Current price
$393.00
free return
Do you live in Belgium or The Netherlands? Then you can return your package for free!
In stock at supplier
Description
| Engine Dimension | ⌀67.2*26.1mm | Configuration | 24N28P |
| Stator | Anti-rust treatment, 180°C heat-resistant coatings | Shaft Diameter | IN:6, OUT:4 |
| Lower | Imported 696ZZ | Magnet level | 150°C high temperature resistance: Level E |
| Pipe | Enameled wire 70mm | Copper wire | 220°C high temperature resistance: Level C |
| Coil Insulation Test | 500V | Rotor Dynamic Balance Standard | ≤5mg |
| IP (Protection rating) | IP25 |
| KV | 160 | Internal Resistance | 178mΩ |
| Quiescent current (18V) | 0.5A | Nominal Voltage (Lipo) | 12S |
| Peak current (180s) | 23.7A | Weight Motor (Incl. Cable) | 159g |
| Max. Power (180s) | 1120W | Weight Packaging | 180g |
| Fashion model | ALPHA 60A 12S V1.2 |
| Supported Voltage (6S) | 18-50.4V |
| Continuous Current | 60A |
| Peak current (10s) | 80A |
| Standby Consumption | ≤50mA |
| BEC | NO |
| Throttle Position Range | 1100-1940μs |
| Throttle Refresh Rate | 500Hz |
| Accelerator response speed | 300ms |
| Mate | 78.7 x 32.5 x 16.2mm |
| Weight (incl. cables) | 73g |
| Fashion model | MF2211 |
| Material | Polymer+CF |
| Weight (Single Propeller) | 71g |
| Diameter | 22.4inch (568mm) |
| Pitch | 8inch (203.2mm) |
| Ambient temperature | -40°C to 65°C |
| Recommended Thrust/RPM | 4~7kg/3700 -4700RPM |
| Recommended Max Thrust/RPM | 11kg / 6500RPM |