Amewi AMXPlanes P68 High Wing 850mm Airplane BNF (Foam)

BNF
The AMXPlanes P68 contains most of the electronic components and only requires a battery, transmitter, and receiver to operate the aircraft.

Overview

The AMXPlanes P68 with dual EDF is designed for entry-level RC pilots and offers quick assembly, easy flying, and compatibility with a 4-channel transmitter. Equipped with two 1806-KV1900 brushless motors, two Hobbywing 20A ESCs, and counter-rotating 3-blade propellers to balance the thrust, the P68 is capable of performing aerobatic maneuvers such as loops, rolls, and inverted flight with a standard 3S LiPo battery (800-1300 mAh).

The single-piece wing with integrated electrical connections and a glue-free design allows for quick assembly and easy transport. Due to its compact size, it can be flown in smaller fields or model flying fields. The fixed landing gear, with a steerable nose wheel, facilitates taxiing, takeoff, and landing on both smooth and uneven surfaces such as grass runways. For higher top speeds or hand launches, the landing gear can be removed (recommended for advanced pilots, landing occurs on the fuselage).

Characteristics

• Very visible design and advanced construction: the flight behavior of the P38 also becomes interesting for less experienced pilots.
• Counter-rotating 3-blade propellers: the torque of the propulsion system is balanced, making the flight behavior more neutral and preventing the model from "spinning" around its longitudinal axis.
• Full control on the ground: thanks to a stable landing gear including a steerable nose wheel.
• High-quality EPO construction with very good fit accuracy of the individual components, tailplane and wing are screwed together (no glue needed)
• Wing made from one piece and fully wired, ailerons, motors, and speed controller fully installed in the wings.
• Hobbywing 20A speed controller pre-assembled for good response and smooth operation of both motors.
• Powerful 1900KV motors pre-installed
• Flight time with LiPo battery 3S 1300mAh up to 10 minutes

What is included

• Model
• Screws
• Instructions for use DE/EN

What else is needed

• LiPo battery 3S 11.1V 800-1300mAh XT30
• Barns
• Transmitter + receiver min. 4 channels