Amewi Benz Arocs License Crane Truck w/ Tipper 1/14 PNP (vegetable)
free return
Do you live in Belgium or The Netherlands? Then you can return your package for free!
Description
PNP
The Benz Arocs Licence Crane Truck is delivered with all the electronics needed to operate the Truck. The only thing you need to do is install the batteries. Batteries for the remote control are not included and must be provided by you.
Overview
Licensed Mercedes-Benz Arocs vehicle with crane superstructure and tipping function, which complements our other licensed models from the Arocs tipper truck series (also in scale 1:14) and not only convinces visually with its special paintwork but also with its range of functions. All driving functions and various functions of the crane superstructure (except for rotating and opening/closing the grab) can be fully proportional controlled. In addition, a scrap grabber is included in the set, which allows for even more variation in use and guarantees diversity. Both grabbers, wood grabber and scrap grabber, can be exchanged in a short time. The vehicle features LED lighting at the front and rear, turn signals at the front and rear, and two yellow warning lights on the roof, allowing for stylish operation even in twilight. Furthermore, the model includes a sound module that realistically represents the driving functions, including a reverse warning sound! All sides of the tipping body can be opened, for example, to transport longer logs. The set is completed by the delivery scope with battery (7.4V LiIon 1200mAh), charger, high-quality 2.4GHz transmitter, and assembly tools including screws for the additional scrap grabber.
Characteristics
- Electric scrap grabber: Even more variety in use possible
- Exclusive special paint: in green matching forestry work, a real eye-catcher.
- Fully functional crane assembly: Ready mounted on the vehicle, immediately deployable
- PNP version (Plug-&-Play)
- Fully proportional driving functions
- Diverse functions of the crane proportionally adjustable (up/down: main arm and jib)
- Li-Ion 7.4V 1200mAh battery for long driving times of up to 20 minutes
- High-quality 2.4GHz transmitter with a total of 16 control functions
- Extra accessories included (tools for assembly, screws for assembly)
- Powerful drive and protection on the gripper (jumps over if the load is too high)
- Rubber tires
- 4WD drive
| Dish | 1:14 |
| Length | 490 mm |
| Width | 155 mm |
| Height | at least 300 mm |
| Weight | approx. 2450 g |
| Wheelbase | 260 mm (first to last axle) |
| Track width for | 120 mm |
| Rear track width | 120 mm |
| Ground clearance | ca. 18 mm |
| Front wheels | Outside diameter/width 65 / 20 mm |
| Rear wheels | Outer diameter/width 65 / 25 mm |
| Wheel diameter | 37 mm |
| Gearbox | plastic |
| Rem | electronic |
| ESC | All-in-one unit |
| Engine | Brushed |
| Main material | plastic |
| Accucompartiment | 85x50x33 mm |
| Accu | Li-Ion, 2S 7.4V 1200mAh, round cells type 13650, BEC connector, 70x35x20 mm, 73 g |
| Driving time | total 20 minutes |
| Top speed | approx. 8-10 km/h |
| Remote control | 16 channels, 2.4 GHz, auto-binding |
| Reach | approx. 60-80 m |
| Charger | USB |
| Charging time | 100-120 min |
What is included
- Model
- Remote control
- Battery
- Charging cable
- Screwdriver
- Screw
- Scrap grabber
- Manual DE/EN/FR/IT
What else is needed
- 4x 1.5V AA batteries for the remote control