Hobbywing Quicrun 10BL120 G2 ESC/3650SD 2850kV 13.5T Motor Combo
free return
Do you live in Belgium or The Netherlands? Then you can return your package for free!
Description
Overview
The first 1/8 scale competition ESC that can use full sensor mode at all times (when paired with a HOBBYWING matching motor). Turbo timing technology is implemented by the XR8 SCT to unleash the maximum power from a HOBBYWING matching engine. Built with the most rugged and high-quality components and coupled with advanced firmware, the , overuse or even human error.
The Hobbywing XERUN SCT 3652SD G2 Sensored 5100kV Brushless Motor is a 4-pole powerhouse, great for light short track, truck and monster truck sensored applications. Because this motor uses a 5mm diameter motor shaft, it requires pinions with a 5mm bore.
ESC features
- Full sensor mode supported
- Turbo Timing Technology
- Small and light structural design
- Coasting
- Programming/upgrading/wireless data reading
- Thermal protection of capacitor
- High voltage built-in BEC
- Advanced and safe electronic switch
- Ultra-reliable cooling system
- Wide applicability
Engine features
- Innovative 4-pole-8-magnet "staggered pole" rotor (patented by Hobbywing) with low cogging effect and torque pulsation significantly improves the feeling of control in corners.
- Built-in chip to easily identify the motor by HOBBYWING ESCs. When paired with a HW 1/8th sensored ESC (i.e. The Turbo timing may be activated for higher output.
- Magnetic ring mounted on the rotor protects the motor from signal interference and guarantees its super stability in "sensored" mode.
- With the mechanical timing adjustable from 20 degrees to 40 degrees, users can have different output powers.
- Turbine design implemented by the rotor accelerates internal air circulation and reduces heat.
- Rebuildable design (partially rebuildable) and screwless motor housing for easy routine maintenance, effectively extend motor life and increase motor efficiency.
- CNC machined aluminum housing, high purity copper windings, advanced rotor structure, high quality alloy steel output shaft, high precision bearings for high durability and smoothness.
- Updated "U" solder tabs on the bottom of the motor for easy soldering and wiring.
ESC
| Dish | 1/8e, 1/10e |
| Type | Brushless |
| Sensor | Sensor controlled |
| Waterproof | Nee |
| Continuous/Peak current | 140A / 880A |
| Input voltage | 2-4S Lipo, 6-12 cellen NiMH |
| BEC output | 6V / 7.4V, 6A (switch-mode) |
| Input cables | Red (12 AWG, 200 mm), black (12 AWG, 200 mm) |
| Output cables | Blue (12 AWG, 200 mm), Yellow (12 AWG, 200 mm), Orange (12 AWG, 200 mm) |
| Input connectors | No |
| Output connectors | No |
| Ventilator | 30 x 30 x 10 mm |
| Voltage range | 5-7.4V |
| LCD programming box | Supported |
| WiFi-module | Supported |
| Firmware-upgrade | Supported |
| Dimensions (LxWxH) | 54,1 x 37,2 x 36,1 mm |
| Weight | 90,5 g |
Engine
| Dish | 1/10e |
| Type | Brushless |
| Sensor | Sensor controlled |
| Poland | 4 |
| KV value | 4300 kV |
| The LiPo cell | 2S |
| Current when no load | 4.2 A |
| Resistance | 5.2 mΩ |
| Outer diameter | 36 mm |
| Length | 52.5 mm |
| Asdiameter | 5 mm |
| Weight | 187 g |
| Axle length | 15 mm |
| Timing | 20-40 degrees (adjustable) |