iFlight BLITZ F7 Pro Combo Set w/ BLITZ E80 Single ESC
by iFlight
Sold out
Original price
$0.00
-
Original price
$0.00
Original price
$0.00
$490.00
$490.00
-
$819.00
Current price
$490.00
free return
Do you live in Belgium or The Netherlands? Then you can return your package for free!
Out of stock
Out of stock
Description
Characteristics
- Improved circuit design, better components and less electrical noise!
- DJI HD VTX connector (Plug-and-Play / no soldering required)
- FC indicator LEDs for visual troubleshooting
- Black Box van 512 MB
- Met LC-filter
| Mounting pattern | 35*35mm/ 4mm PCB gat diameter |
| Smartaudio / IRC Tramp VTX protocol | Supported |
| Firmware target | IFLIGHT_BLITZ_F7_PRO |
| Input voltage | 14.8V-34V (4S-8S LIPO) |
| Engine outputs | 4x (SH1.25 connector) |
| flash memory | 512MB (Blackbox flash) |
| I2C serial | SDA / SLA pads |
| Dimensions | 41*41.5mm |
| Barometer | DPS310 |
| OSD Chip | AT7456E |
| LED controller | And |
| MCU | STM32 F722 |
| Weight | 14g (±2) |
| Beeper pad | And |
| Gyro | BMI270 |
| UARTS | 4 |
Description
BLITZ E80 BLHeli Dshot600 Single ESC is designed to give your motors smooth power with great stability and durability. The 32bit 48mHz G071 MCU and 11 pcs TDK MLCC in total 240UF Low ESR co
Characteristics
- 2-8S input (max 8S)
- 80A 8 layers 4OZ copper PCB, better operating load capacity
- 11 pieces TDK MLCC total 420UF Low ESR capacitors, lower ripple and more stable
- High quality NTMFS5C430NL MOSFET, stable and reliable
- 1 * 3528 LED for power on display
- Rational layout, large solder pad, recessed cavities and hemispherical openings ensure that each layer is powered after power-up.
| Model |
BLITZ E80 Single ESC |
| Input voltage | 2-8S |
| Max. continue stroom | 80A |
| Max. peak current | 100A |
| MCU | G071 |
| BEC | Nee |
| Firmware | BLHeli32 |
| Current sensor | And |
| telemetry | Supported |
| Goal | IFLIGHT_BLITZ_G2 |
| Dimensions | L40 x B17 x H10mm |
| Weight | 9.5g(±2) |
| Protocol | DShot DShot150/300/600/MultiShot/OneShot PWM Drive |
| Support | Current sensor, Telemetry output, Motor timing, Brake at stop |
Package included
- 1 x BLITZ F7 Pro Flight Controller
- 8 x BLITZ E80 Single ESC met CNC Alum Cover (optioneel)
- 8 x 50V 470UF capacitor (optional)
- 8 x power cables and ESC signal wires (optional)
- 2 x BLITZ Pro PDB (optional)
- 4 x BLITZ E80 Single ESC met CNC Alum Cover (optioneel)
- 4 x 50V 470UF capacitor (optional)
- 4 x power cables and ESC signal wires (optional)
- 1 x BLITZ Per VOB
- 1 x Screw Pack
- 1 x USB-adapterkaart