Skip to content
FAQ Contact Order Tracking Affiliate
iFlight GOCam PM GR Charger Hub w/ Battery Combo - upgraderc

iFlight GOCam PM GR Charger Hub w/ Battery Combo

by iFlight
$0.00 - $0.00
$0.00
$36.00
$36.00 - $87.00
$36.00

free return

Do you live in Belgium or The Netherlands? Then you can return your package for free!

In stock at supplier
In stock at supplier
In stock at supplier
Choose a variant to show shipping times
Choose a variant
Description
GOCam PM GR Action Camera Battery
  • Minimum capacity: 450mAh
  • Current: 1C
  • Net Weight: 15.1g

GOCam PM GR action camera charging hub
  • Input voltage: TYPE-C connector can input 4.6V-5.6V. Lower than 4.6 V results in insufficient input power and slower charging speed. The XT60 interface can input 9-26V.
  • Output voltage: standard 4.2V.
  • Output current: single 500mA, three lines simultaneously total 1.5A.

Operating and Operating Instructions for the Charger Hub
  • When using Type-C, make sure the power of the charging head output can satisfy the charger and use the high quality data cable to achieve the best performance.
  • The charger has a single line 500mA charging current and three lines can work at the same time. It takes approximately 60 minutes to fully charge the three GOCam batteries.
  • Power the charger first and then connect the GOCam battery. It is forbidden to connect the battery before powering the charger, otherwise the charging head may not supply power.
  • After turning on the charger, connect the battery to be charged to start charging. The color of the LED when charging is red and the color of the fully charged LED is green. After the battery is fully charged, charging will stop automatically.

Remark
  • While charging, provide a well-ventilated area and keep away from flammable materials.
  • It is forbidden to supply power to TYPE-C and XT60 at the same time.
  • It is strictly forbidden to input a voltage of more than 5.8V to the TYPE-C connector, which will damage the product. It is recommended to use 5V for the best supply voltage. It is strictly forbidden to input a voltage of more than 26V to the XT60 connector, which will damage the product. Recommend the best power supply voltage to use 9V-26V.
  • This charger can only charge GOCam batteries. It is forbidden to use this charger to charge other batteries