X-501 Coaxial Arm Set (MN501-S KV300, Alpha 40A LV, P20*6 Prop)
by T-Motor
Sold out
Original price
$0.00
-
Original price
$0.00
Original price
$0.00
$486.00
$486.00
-
$632.00
Current price
$486.00
free return
Do you live in Belgium or The Netherlands? Then you can return your package for free!
Out of stock
Out of stock
Description
| Engine Dimensions | ⌀55.6x 33.9mm |
| Stator | Imported silicon steel sheet; Anti-rust treatment; 150°C high temperature resistant coatings |
| Configuration | 24N28P |
| Shaft diameter | IN: 6mm OUT: 4mm |
| Bearings | Imported 696ZZ |
| Magnetic properties | Resistant to high temperatures up to 180°C |
| Wiring | 16AWG x 150mm |
| Copper wire | 220°C high temperature resistance: Level C |
| Test insulation of the coil | 500V |
| Centrifugal cooling design | Yes |
| Rotor Dynamic Balance Standard | ≤5Mg |
| Engine dynamic balance as standard | ≤50Mg |
| IP rating | IP35 |
| KV value | 300 |
| Rated voltage (Lipo) | 6-8S |
| Quiescent current (15V) | 1.1A |
| Peak current (180s) | 40A |
| Internal resistance | 63mΩ |
| Max. Power (180s) | 1000W |
| ESC recommendation | Air 40A |
| Propeller recommendation | 20-22" |
| Motor weight (Including cable) | 175g |
| Supported Voltage (6S) | 18-25.2V |
| Continuous Current | 40A |
| Peak current (10s) | 60A |
| Standby Consumption | ≤50mA |
| BEC | NO |
| Throttle Position Range | 1100-1940μs |
| Throttle Refresh Rate | 500Hz |
| Accelerator response speed | 1200ms |
| Mate | 64.5 x 29.4 x 14.7mm |
| Weight (incl. cables) | 54.5g |
| Fashion model | 20x6 inches (508mmx152.8mm) |
| Weight (Single Blade) | 47g |
| Thrust Limitation | 10kg |
| Optimal RPM | 3000-5500 RPM/min |
| Surface treatment | Polished |
| T-MOTOR Series | Integrated with 2 blades |
| Material | CF+Epoxy |