Cross RC JT6 6WD 6X6 1/10 Crawler PNP

PNP
The Cross RC JT6 is delivered fully roadworthy, you only need batteries for the receiver and for the RC itself.

Fitted with a two-speed adjustable gearbox
6-wheel three-axle steerable limited slip differential (front axle and rear dual axle controlled by 2 servos), reinforced portal axles and 120mm MUD tires for excellent off-road performance.

Chassis
EMO's ultra-low center of gravity chassis with a front drive system and four-wheel drive with center differential, providing excellent weight distribution and handling for off-road driving.

Back plate
The back plate of the JT6 is made of robust and reliable ABS plastic and can accommodate various 1/10 scale vehicles.

Drie-assig portal
The JT6's third axle is powered directly from the center differential box via a gantry system. This solution has been tested in the AT6 and is better suited to 6x6 tracks, as it provides direct power to the rear two axles for climbing and obstacle crossing without the gear grinding problem that can occur with a thru-axle design.

Differential lock operation
The JT6's differential locks are controlled by two servos, with one servo for the front steering axle and one for the rear two axles. This allows for more flexible operation of the differential locks.

Drivetrain
The low center of gravity, light weight and small all-metal two-speed gearbox is matched by a well-designed high/low gear ratio. The low gear ratio can reach a maximum reduction of 49.8, suitable for climbing with heavy loads, while the high gear ratio is 25.2, double the speed of the low gear ratio, allowing rapid crossing without falling behind. In 2021, some players even used this gearbox to push the AT4 to a top speed of 110 km/h. The EMO AT6 also comes standard with a 550 torque motor.

shafts
The imported reinforced material portal axles have been tested in many extremely cold regions, such as Harbin, achieving the best balance between strength and flexibility.

delay
The all-metal CNC-machined shock absorbers, combined with specially tuned springs, provide both support and the most flexible axle position.

MUD tires
The 120 x 45 mm, 1.9-inch MUD CRAWLER tires, combined with lightweight beadlock wheels, have an overall weight comparable to that of carbon fiber wheels, effectively reducing the load on the axles and reducing the explosive power of the vehicle is enlarged. The MUD CRAWLER tires are made of selected synthetic materials and are highly recommended by many enthusiasts for their excellent performance.