Skip to content
FAQ Contact Order Tracking Affiliate
47216501195076|47216501227844|47216501260612|47216501293380|47216501326148|47216501358916

GEPRC 3.5" Cinelog35 V2 HD O3 FPV Drone BNF

by GEPRC
$0.00 - $0.00
$0.00
$776.00
$776.00 - $856.00
$776.00

free return

Do you live in Belgium or The Netherlands? Then you can return your package for free!

In stock at supplier
In stock at supplier
In stock at supplier
In stock at supplier
In stock at supplier
In stock at supplier
Choose a variant to show shipping times
Choose a variant
Description
Overview
CineLog35 v2 version integrated with O3 VTX. The CineLog35 V2 version of the main carbon plate and injection protection frame raised the 7075 aluminum column for structural reinforcement.
The battery mounting method uses a cable tie with 7075 aluminum parts attached. The powerful XT60E1-M plug is integrated with the carbon plate for easy application. The protective frame for the O3 Air Unit adds a memory card and USB port for easy data reading.
Equipped with F722-45A AIO and the new SPEEDX2 2105.5 engine, more power, with aggressive power system and faster response.
This is a 3.5-inch HD FPV cinematic FPV drone that integrates cinematic, freestyle, leisure and safety to meet the user's requirements for flying and filming various indoor and outdoor scenes. The satisfied voice of the user is the motivation for us to continue.
Characteristics
  • Novel appearance design, reinforcing carbon plate, hollow design, injection protection frame, noise reduction design, flight safety, quiet.
  • Adopts GEP F722-45A AIO V2 high performance flight controller.
  • Propeller Guard adds memory card and USB ports to the O3 Air Unit for easy data reading
  • For O3 camera design independently under hanging shock absorption gimbal, to solve the IMU resonance problems of the camera, to achieve the optimal anti-shake effect.
  • SPEEDX2 2105.5 engine with HQ DT90 propeller, stable output power and smooth flying feeling.
  • Power cable with XT60E1-M plug and carbon plate integrated design, convenient application.
  • Battery installation method using strap with 7075 aluminum parts, firm and stable.
  • Carefully tuned 3.5-inch HD cinematic FPV with flexible and delicate flying feeling.
Frame GEP-CL35 V2
Wheelbase 142mm
Gimbal Plate 2.0mm
Top Plate 3.5mm
Bottom plate 1.5mm
FC system GEP-F722-45A AIO V2
MCU STM32F722RET6
Gyroscope ICM 42688-P
OSD Betaflight OSD w/AT7456E chip
ESC 8Bit 45A
VTX O3 Air Unit
Camera O3
Antenna 5.8G&2.4G
Motor SPEEDX2 2105.5 2650KV (6S)
Propeller HQProp D-T90MM
Weight CineLog35 V2 HD O3 TBSNanoRX: 285.8g
Recipient PNP, GEPRC ELRS 2.4G, TBS Nano RX
Recommended battery LiPo 1050mAh-1300mAh
Flight time 5′00″ - 8′ 30″

 

What's included

  • 1 x Cinelog35 V2
  • 2 x HQProp D-T90MM (2 pairs)
  • 2x M20*250mm battery strap
  • 2 x Silicone Battery Pads
  • 1 x set of screws
  • 1 x L-shaped screwdriver (1.5mm)
  • 1 x L-shaped screwdriver (2mm)
  • 1 x L-shaped screwdriver (3mm)
  • 1 x M5 key
  • 1 x plastic tweezers
  • 1 x Antenna fixed tube (pair)
  • 1 x Keychain
  • 1 x Naked fixed base
  • 1 x Naked fixed base
  • 1 x Wide Base Antenna
  • 1 x screw set